NewResin printing

Industrial-grade precision

20 µm layer height5 times thinner than a human hair

Extremely sharp detail for prototypes and small detailed parts like miniatures and figures, with faster print times than FDM.

  • See the price straight away
  • Washed and cured
  • For businesses and private customers
The Anycubic Photon P1 resin printer we print on
  • 20 µmlayer height
  • 14Kscreen resolution
  • 211 × 119 × 225 mmlargest part
  • Grey resineasy to prime and paint

Order online

Upload a file. See the price. Order.

Turn the part the way you want it printed and see where the supports go. Printed in grey resin, washed and cured.

  • You decide how it's printedTilt and turn the part in 3D, 10° at a time or to the exact degree.
  • See the supports before you orderA preview shows where supports will touch your part.
  • Keep the surfaces that matter cleanMark where you don't want supports, right on the part.
Drop your 3D file here STL, 3MF, OBJ, STEP or GLB, one part at a time, or a .gyroid design

What it's for

For businesses and hobbyists

Resin suits parts where the details matter more than toughness.

Gears, rings and housings printed in grey resin

For businesses

Prototypes and small series

  • Prototypes and show models that look like the finished product
  • Small parts with text, logos and clips
  • Master models for silicone moulds
  • One part or a larger batch
Upload a file
A detailed figure printed in grey resin

For hobbyists

Figures, miniatures and models

  • Miniatures for tabletop and board games
  • Figures and busts to paint
  • Terrain, scale models and dioramas
  • A single figure is fine
Upload a file
Anycubic Photon P1 with the lid open, next to a figure printed in grey resin

The printer

Anycubic Photon P1

A resin printer with a 14K screen and a heated vat, so the resin stays at the right temperature through the whole print.

Screen
10.1" 14K mono LCD
XY resolution
16.8 × 24.8 µm
Layer height
20–150 µm
Build volume
223 × 126 × 230 mm
Material
Grey resin
After printing
Washed, cured, supports removed
Resin parts hanging from the build plate of a resin printer

How it works

From file to finished part

  1. You upload the fileSTL, 3MF, OBJ or STEP. Turn the part the way you want it printed and see the price.
  2. We add the supportsThin pillars hold the part while it prints. Tell us if a surface must stay free of them.
  3. We printThe part grows layer by layer, upside down under the build plate.
  4. Washed, cured and checkedWe take the supports off by hand, wash off the liquid resin and cure the part in UV light. Small marks stay where the supports were. We don't sand them.
  5. We shipWithin 3 working days.

FAQ

Questions about resin

Can't find your answer? Email us. The person who prints your part answers, usually the same day.

support@gyroid.se

Upload the file and you see the price straight away. It is made up of print time, which follows how tall the part stands, the resin it takes, a small fee per part, and handling once per order.

Hard and stiff, but more brittle than PETG. If the part has to take knocks, bend or sit in the sun, PETG is usually better, and you can order that on the site.

Yes, small marks stay where the supports were. We take the supports off by hand but don't sand the part: you get it as it comes off the printer and finish it the way you want. A light sanding takes the marks off. Tell us when you order which surfaces must stay free of supports, and we put them on the other sides.

FreeQuote

Ask for a quote

For bigger batches, parts that don't fit the printer and other colours or resins. Send the file and you get a fixed price and a delivery time within 24 hours.

Your request

3D file (optional, up to 50 MB)STL, 3MF, STEP, IGES, OBJ, GLB or a ZIP with several files.

Free quote. We answer with a fixed price and a delivery time within 24 hours.